Seamless gutter installation and replacement in Tulsa

Why seamless

A seamless gutter is formed on site from a single coil of aluminum, so each run is one piece from corner to corner. Sectional gutters from the home center have a joint every 10 feet and every joint is a future leak, and in Tulsa every joint is also a place for ice to get a grip. Seamless gutters Tulsa crews run on site are not a luxury item: the machine does the work, labor is the same as sectional, and the material costs barely more.

Sizing for Tulsa

The standard 5-inch K-style gutter with 2x3 downspouts was designed around moderate, steady rain. Tulsa's rain comes in bursts — an inch or two in an hour during a spring storm is ordinary — and the roofs in Broken Arrow, Owasso and Jenks are big. We calculate the roof area draining to each downspout and use:

• 5-inch gutters with 3x4 downspouts on most single-story homes. The bigger downspout alone adds about 60% capacity and costs very little more.
• 6-inch gutters with 3x4 downspouts on two-story homes, steep roofs, and any run collecting a large roof area or a valley. Six-inch carries roughly 40% more water than five.
• A downspout at least every 35–40 feet. A single downspout at one end of a 60-foot run is the most common reason for overflow we see, and it is the builder's default on new construction.

If your current gutters overflow in a storm, why gutters overflow in Tulsa rain explains what is happening. On a new system the fix is built in.

Built for ice as well as rain

Tulsa's ice storms are the thing that separates a gutter install here from one in Dallas. We hang every run on hidden hangers screwed through the fascia into the rafter tails — never spikes — at 24 inches, and at 18 inches on long runs and on the north side of the house where ice lingers. We use .032 aluminum rather than the .027 most crews carry, because the thicker metal holds its shape under an ice load and a pecan limb. Downspouts get a strap every 8 feet and a bottom elbow that can be popped off to drain before a freeze.

Materials and colors

Aluminum gutters Tulsa homes carry outlast steel by a decade because they do not rust, and .032 aluminum in more than 25 baked-on colors is what we recommend on nearly every house. Half-round in aluminum or copper is available for the 1920s homes in Maple Ridge and Swan Lake where a K-style profile looks wrong. Copper and galvanized steel are quoted separately.

What gutter replacement in Tulsa includes

• Removal and haul-away of the old gutters and downspouts
• Fascia checked with a screwdriver before anything goes up; rotted boards replaced and priced per foot
• New seamless gutters, corners, end caps and downspouts
• Extensions or splash blocks so water lands at least four feet from the foundation
• A water test before we leave

Gutter replacement in Tulsa is most of what we install: 1980s–90s sectional systems on the south side, and hail-damaged runs replaced under an insurance claim alongside a new roof. If a roofer is doing the roof, we coordinate so the drip edge and the new gutter meet properly.

What it costs

Seamless aluminum installed runs about $9–$15 per linear foot in the Tulsa area. A single-story home with 160 feet of gutter and four downspouts is typically $1,500–$2,400; a two-story home with 220 feet and six downspouts, $2,500–$3,700. Six-inch runs, fascia repair and guards are separate lines on the same estimate. Gutter installation cost Tulsa-wide is on the cost page in tables, and what the price per foot buys explains why three quotes on the same house can be $1,000 apart.

Homes that never had gutters

A fair number of Tulsa homes — some 1950s ranches in midtown, a lot of 1990s–2000s single-story builds in Owasso and Bixby — were built with gutters on the front only, or none at all. A trench worn into the mulch under the roofline, mud on the brick, and a foundation company telling you to control drainage are the signs. First-time installation is priced the same as replacement minus the tear-off, and partial runs over the entry, the garage and the side with the AC unit are a normal job. Rain gutters Tulsa homes were built without are usually the cheapest foundation work anyone will ever quote you.

Installation day

The crew arrives with the coil and the machine on the truck. Old gutters come down, fascia gets checked, each run is measured and formed to the wall, corners are sealed, downspouts strapped, extensions set, and we run a hose through every run. Most homes are done between 8 a.m. and mid-afternoon. Gutter installation Owasso, Broken Arrow, Jenks and Bixby homeowners book is the same crew and the same day rate as midtown. Gutter installation Tulsa OK homeowners schedule in October and November also beats the ice, which is the point.